top of page
Search

Stockpile volumetric measurement with Laser Scanner

Updated: Dec 7, 2023


Stockpile volumetric measurement
Stockpile volumetric measurement

Stockpile volumetric measurement is necessary for inventory of gravels, sand, coal and ores which are usually keep in form of mountain size piling, to archive accurate measurements, the right survey tool and calculation software is required.

Stockpile 3D volumetric survey
Stockpile 3D volumetric survey

Tensile Creator Co.,Ltd. provides stockpile measurement service by using laser scanner. The scanner will collect millions of surface's positions by measuring distant from scanner to the surface then arrange them into 3D image using internal motion sensor. But in such a large outdoor area with fewer reference point we need to connect the scanner to RTK GNSS satellite receiver for data correction and prevent scanner drifting. (Each point is only a few millimeters apart.)


Survey stockpile with LiDAR scanner
Survey stockpile with LiDAR scanner

This survey method gives complete and very accurate data. (Less than 15mm error) and uses shorter survey time, 10 minutes for 10,000 m2 (Scanner has scanning radius of 125 m)

Stockpile point cloud
Stockpile point cloud

Above photo is resultant point cloud from 9,200 m2 x 34 m height stockpile


The volumetric calculation software creates small cubic 10cm x 10cm stick and replicate the shape of the point cloud. Then the volume is calculated from the volume of overall small cubic.


Volume calculation report
Volume calculation report

If you are interested in stockpile volumetric measurement service, please contact us via chat box below or call 081-926-5177

The service price is listed below.


Stockpile volumetric measurement service fee

First 1,000 m2 - 5,000 THB*

Each square meter above 1,000 m2 - 2 THB/m2*

*Price excludes VAT and traveling fee.





183 views0 comments

Comentários


bottom of page